Field Technician Computing and Peripherals Questions and Answers [ SET - 3 ] | FTCP Model Questions and Answers

 Table of Content (toc)

 FTCP Model Questions and Answers

1. A customer complaints that his computer is not powering up. You call the customer.What will you suggest to him?

A) Check whether the plug is fitted properly
B) Check whether power supply has the required voltage
C) I will ask him to try to connect the PC on to different wall socket with different cables.

ANSWER= (A) I will ask him to try to connect the PC on to different wall socket with different cables.

 

2. What will you instruct the customer who complains that he is not able to use hard disk drive beyond 528 MB capacity

A)  Disable LBA mode from BIOS
B) Enable LBA mode from BIOS
C) Upgrade Flash BIOS 
D) None of the above

ANSWER= (C) Upgrade Flash BIOS 

 

3. Passage:

Symptoms: Hard Disk is making a strange noise, Files are disappearing automatically, Mouse and

keyboard is not responding, Book up process is locked up. Which is the possible cause of the problems?

A)  Hard Disk drive problem 
B) Virus problem
C) Software Problem
D) SMPS failure

ANSWER= (A)  Hard Disk drive problem

 

4. You call a customer to ask about the location where he is living. The customer is having some hardware problem. Which of the following is an appropriate question to enquire the location of the house of the customer after connecting the call?

A) “Sir. Where is your house?”
B) Sir, I am calling from ABC computer. Can I know the location of your house?”
C) “Sir, Tell me the location of your house or I cannot come for installation?”
D) “Sir, myself field technician Sunil from ABC Computers. Can I know the location of your house?” 

ANSWER= (D)“Sir, myself field technician Sunil from ABC Computers. Can I know the location of your house?” 

 

5.  When a customer is starting his system a “hard disk security error” is displayed. Which of the following will you do?

A)  Go to CMOS Setup and deactivate the Hard disk security system
B) Will choose safe mode
C) Change the logic card of hard disk
D) Call the updated driver

ANSWER= (D) Call the updated driver

 

6. A customer complains that the multimedia keys on his keyboard are not working but the standard keys are working. What will you tell the customer?

A) I will tell the customer that the keyboard needs to be changed
B) I will tell the customer that the port to which the keyboard is connected on the computer to be changed .
C)  I will inform the customer that the key board plugs might have loose connections.
D)  I will inform the customer that the latest drivers need to be installed for the keyboard.

ANSWER= (D) I will inform the customer that the latest drivers need to be installed for the keyboard.

 

7. You have been assigned to do 40 tasks that you have to complete within 15 days. 25 of them are installation and 15 of them are repair work. How will you plan you work?

A) Do both installation and repair together
B) Complete the installation task first
C) Complete the repair work first

ANSWER= (A) Complete the installation task first

 

8. What will you do when you can’t use AGP card as primary video________

A) Enable USB legacy support
B) From CMOS set select Initial display as AGP 
C) Use CMOS to find conflicts and resolve

ANSWER= (B) From CMOS set select Initial display as AGP

 

9. Passage: Company’s policies to set the field trip: Problems related to “out of warranty products” should be handled at the end of week. Software regarding complaints related to “in warranty products” should be given first preference. Hardware problems related to “in warranty products” should be solved only after the completion of SW products. Problems related to networking devices should be solved after HW and SW related problems of “in warranty” products. Note the products which are purchased after 15th August 2013 are only under one year warranty. (Consider the present date 20th July 2014) From customer care department you have received the following problems: Mr. Sharma’s modem is notworking properly which was purchased on 18/12/2013, Mr. Sunil is facing software problem in the systemwhich was purchased on 19/9/2013, Mr. Gupta had complained that few keys of his keyboard is not working which he had purchased last week, Mr. Verma’s complaint is regarding CD Drive problem which was purchased on 3rd July 2013. Choose the table which shows the correct order for going on field trip.

A) Mr. Sunil - Mr. Gupta - Mr. Verma- Mr. Sharma
B)  Mr. Gupta- Mr. Verma- Mr. Sharma-Mr. Sunil
C) Mr. Sharma-Mr. Sunil - Mr. Gupta-Mr. Verma
D) Mr. Sunil -Mr. Gupta-Mr. Sharma- Mr. Verma

ANSWER= (D) Mr. Sunil -Mr. Gupta-Mr. Sharma- Mr. Verma

 

10. You go to a customer's place for soldering. You find that the soldering machines is not working. Probably the motor of the machine has burnt out. But you need to complete the task today itself. What will you do?

A)  Will report to the supervisor and wait for the next step.
B) Will buy a new soldering machine, complete the task and then report to the supervisor
C)  I will not do anything and inform the customer that I will not be able to do anything

ANSWER= (A)  Will report to the supervisor and wait for the next step.

 

11. WAN One customer asks you to install application software to create an Electronic Interactive presentation which will include audio and text. Which of the following should be installed?

A) Project Management SW
B)  Projection graphics HW
C)  Computer aided design (CAD SW)
D) Multimedia Authoring SW 

ANSWER= (D) Multimedia Authoring SW 

 

12.  Summary

• Problems related to software are reported to Helpdesk
• Problems related to tools & equipment are report to Supervisor
• Problems related to customer complaint are reported to customer support

While carrying out installation process, you face a lot of problems due to faculty tools provided by the company. To whom will your report?

A) Supervisor 
B) Colleague
C) Customer support

ANSWER= (A) Supervisor 

 

13. What will you do if there is buildup of magnetic field due to placement of speakers near the monitor?

A) Click on monitor’s menu option and then click on moire to remove the magnetic field
B) Click on monitor’s menu option and to remove the magnetic field click on demagnetise
C)  Click on monitor’s menu option and to remove the magnetic field click on degauss *
D) Click on monitor’s menu option and to remove the magnetic field click on OSD control

ANSWER= (C)  Click on monitor’s menu option and to remove the magnetic field click on degauss 

 

14. While doing repair of monitor at a customer’s place you find that they have covered the back side of CPU with a plastic sheet. Based on company policy the CPU back side should not be covered with anything.

What will you do in such a situation?

A)  I will inform the customer that the CPU should not be covered with anything and they should remove the plastic sheet 
B) I will inform about this to my colleague but not to the customer
C)  I will not inform the customer as it is his choice to keep the CPU covered
D)  I will shout at the customer that he does not know how to keep the CPU and tell him that he should read the manual properly

ANSWER= (A)  I will inform the customer that the CPU should not be covered with anything and they should remove the plastic sheet 

 

15. You are in the middle of installation of hardware at a customer’s place and your colleague calls you saying that he needs some help with installing the SW at another customer’s place which is nearby. Your work will be completed in few more minutes. What is the best possible thing to do at this time?

A) I will tell the colleague that I cannot help him as it is his job to do the installation
B) I will ask my colleague to do it the way he knows if it does not work out
C) I will finish my work and then go and help my colleague with his work 
D)  I will leave my work and help my colleague as the customer he is handling should be satisfied

ANSWER= (C)  I will finish my work and then go and help my colleague with his work

 

16. Which of the following is not a type of RAM?

A) SLIPP
B) ROM
C)  SIMM
D)  DIMM

ANSWER= (B) ROM

 

17. Guideline 1. Problem regarding repair should be reported to company’s repair station

      Guideline 2. Problem regarding warranty issues should be reported to supervisor.

      Guideline 3. Problem regarding Software should be reported to company’s helpdesk

You are facing problems while installing windows in a customer’s PC while on site. To whom will you report this problem to seek advice?

A) To the company’s helpdesk 
B) To the company’s repair centre
C) To your supervisor
D) To your colleague

ANSWER= (A) To the company’s helpdesk 

 

18.  You are installing a printer that is not supporting wireless network nor has Ethernet port. What will you do?

A)  Set the printer as network printer
B) Set the printer as wireless printer
C) . None of the above 
D) Types 4th options

ANSWER= (C) . None of the above 

 

19.  What should you do if you get stuck in traffic jam when going to attend a customer request?

A)  Do not worry about the delay
B) Inform both the customer and your superior
C) Do not attend the customer request
D)  None of the given options

ANSWER= (B)  Inform both the customer and your superior

 

20. A customer is unable to switch on his computer system. The issue with the computer is minor as per the initial report. Which of the following timelines should you adhere to resolve his issue-?

A) You should resolve the issue same day
B) You should resolve the issue next week
C) You should resolve the issue next day
D) You should resolve the issue next month

ANSWER= (A) You should resolve the issue same day

 

21. After completing the installation of webcams at a client office, what should be the necessary step that should you take after reaching your office?

A) Attend to next customer query
B) Visit the next site
C) Submit the feedback form on customer satisfaction level*
D) Retire for the day

ANSWER= (C) Submit the feedback form on customer satisfaction level

 

22.While checking a customer's system you find the mother board is faulty. What will you suggest to the customer?

A) “Sir, the mother board is faulty because some parts are blown off. Please replace the mother board”
B) Sir, I cannot do anything. Please contact the repair centre”
C)  Sir Please change your motherboard
D) Sir I want to call my Supervisor for his suggestion.

ANSWER= (A) “Sir, the mother board is faulty because some parts are blown off. Please replace the mother board”

 

23. Identify the hardware show in the following image

A)  SATA Cable
B) Motherboard
C) Hard Disk
D)  Ram

ANSWER= (B) Motherboard*

 

24. Which of the following instruments should you use to check if the circuit connection is good or bad?

 A) V-meter
B)  DC-Amperes.
C) Digital Multimeter

ANSWER= (C) Digital Multimeter

 

25. A customer wants to avail the warranty of the following port which is in warranty period. Identify the port depicted in the following figure

A)  USB Port
B)  Infrared Ports
C)  D-Sub Ports
D)  RJ Ports

ANSWER= (D) RJ Ports

 

26.  Which of the following elements can be present in warranty template –

A) All of the given option
B)  Time period of coverage
C) Type of problem covered
D) Parts of product covered

ANSWER= (B)  Time period of coverage

 

27. What information you will share with the customer during the visit for attending complaints –

A) About other useful product offered by the company
B)  Sensitive information of the company
C) Company confidential information
D) The advantage of competitor products

ANSWER= (A) About other useful product offered by the company

 

28. A customer is facing problem with internet connectivity. You call the customer. What will you ask him?

A) Will ask the customer what internet connection he is using
B) Will ask which operating system he is using
C) Will ask him to check whether the service provide has locked his connection

ANSWER= (A) Will ask the customer what internet connection he is using

 

29. Which of the following is helpful in measuring customer satisfaction-?

A) Customer availability
B) Customer work experience
C) Customer queries
D) Customer feedback

ANSWER= (D) Customer feedback

 

30.  Which of the following tool will you collect from the tool room or store if you have to repair bad capacitor on a PCB________

A)  Millimeter, Cutting pliers, capacitor
B) Loop back plugs, pliers, capacitor
C) Extension magnet, cutting pliers, flux, capacitor
D) Soldering iron, capacitor, cutting pliers *

ANSWER= (D) Soldering iron, capacitor, cutting pliers 

Previous(demo)    Next(demo)                                                                                                                                           
Field Technician Computing and Peripherals MCQ SET -1(link)

Field Technician Computing and Peripherals MCQ SET -2(link)

Field Technician Computing and Peripherals MCQ SET -3(link)

Field Technician Computing and Peripherals MCQ SET -4(link)

Field Technician Computing and Peripherals MCQ SET -5(link)


Field Technician Computing and Peripherals MCQ SET -6(link)














Computer Hardware MCQ SET -1(link)



Computer Hardware MCQ SET -2(link)



Computer Hardware MCQ SET -3(link)



Computer Hardware MCQ SET -4(link)



Computer Hardware MCQ SET -5(link)

Related Quaries:

ftcp model questions and answers

ftcp question paper pdf

hardware and networking multiple choice questions and answers pdf

computer troubleshooting questions and answers pdf

ftcp questions and answers pdf

field technician computing and peripherals question paper

tec final exam questions and answers 2021 pdf download

field technician computing and peripherals questions and answers

hardware questions and answers pdf

computer components questions & answers

computer hardware questions and answers in hindi

basic computer hardware test questions

hardware troubleshooting questions and answers

Field Technician Computing and Peripherals Questions and Answers [SET - 3]

Here are some frequently asked questions (FAQ) about Field Technician Computing and Peripherals, along with their answers:

Q: What is a Field Technician Computing and Peripherals?

A: A Field Technician Computing and Peripherals is a professional responsible for installing, maintaining, and repairing computer hardware, peripherals, and related equipment at various locations.

Q: What are the key responsibilities of a Field Technician Computing and Peripherals?

A: The key responsibilities include diagnosing hardware and software issues, replacing faulty components, configuring computer systems, providing technical support to end-users, and documenting service activities.

Q: What skills are required to become a successful Field Technician Computing and Peripherals?

A: Some essential skills include technical proficiency in computer hardware and peripherals, troubleshooting abilities, communication skills, customer service orientation, and the ability to work independently.

Friends if you like this post,kindly comment bellow and do share your responce.Thank You for Visiting.